Search results

I bought a "made to order" Mini Uzi Pistol from Kelly Arms in late 2013. It was built on a cut down vector receiver marked like Trilogymac's.

Here is my baby ghost with the Lage folding K stock and Omega 9K with CF-W bolt.

https://www.rockislandauction.com/catalog/1045?keywords=Class%2520iii

I think the same could be said for Jmacken37

He made a machined the "nut" with teeth. The two endcaps are SilencerCo Alpha (1.125x28) & Bravo/Hub.

FYI on CT9KS. Joe made me a hub threaded end cap and a MicroUzi barrel nut to HUB adapter. I'm not sure if Joe is still doing these since Shaw Armament acquired Curtis Tactical.

Maybe you should go with an adapter to allow a much longer stock... https://www.robertrtg.com/store/pc/UZI-STOCK-ADAPTER-FOR-1913-PICATINNY-STORMWERKZ-p6962.htm

Hey Rob, is this the original upper meant for .380? If so, it will not shoot 9mm successfully unless you replace the .380 barrel with a 9mm barrel. And only shoot 9mm in that config with a cf-w bolt.

A bit of info from this post: https://uzitalk.com/forums/index.php?threads/wts-max-31k-upper.94519/

I have an extra one if you are interested.

I'd get 1/2x28 threads added in front of the MAC threads then put a 3-lug on the fine threads. https://usmachinegun.com/proddetail.php?prod=M11U-0122 https://inleadwetrust.com/product/hk-style-3-lug-suppressor-adapter/

https://trosusa.com/suppressor-thread-adapters/ Might reach out to TROS and see if they will do a 1/2x28 to 7/8x9.

Nice job. Check you bolt if it has the full face. I've see some of these imports that have the bolt from the MicroUzi. I see your top cover is original and maybe even your sights and front lanyard swivel. Sweet.

Medea postie https://www.gunbroker.com/item/985837899

Like a photo of the microuzi rear sight. Do you have the matching front part? george.huntington@gmail.com

Just in case you are not trying to be original....here are several choices. https://www.ftfindustries.com/product/ET-380M11F7.html https://max-11.com/409.php https://usmachinegun.com/proddetail.php?prod=M11SRP-1PCRP https://www.knsprecisioninc.com/product/m11-push-button-take-down-pin/

https://auctions.morphyauctions.com/_M__VERY_FINE_ISRAELI_MILITARY_INDUSTRIES___ACTION-LOT543673.aspx and https://auctions.morphyauctions.com/_M__NEAR_NEW_ISRAELI_MILITARY_INDUSTRIES___ACTION_-LOT543674.aspx I don't watch the semi prices, is the expected?

https://macmachineguns.com/?product=ps-31-zmag-adapter

https://www.rockislandauction.com/catalog/87/class-iii/ Looks a bit depressed to me.

If lip of brass is the bottom, then maybe a new extractor is needed