Search results

Click on the link below to check it out. Since it is a "high quality" upload, pause for a minute and then press play. This ensures smooth playback. If you don't wait 60 plus seconds, the video *may* start and stop on you (at times it may immediately play well and other times you'll have to...

I went to my dealer's shop today to begin the transfer on the Avenger by AAC. It is much lighter than my AWC MK9 and the diameter of the suppressor is nearly the same as the barrel nut. I plan on dedicating this suppressor to my MK760 and use the MK9 on my Uzi and M16/9. Dan

This video was taken last June while my father-in-law was visiting. The beginning shows my suppressed Uzi, but most of the video is of the MK-760 (with and without suppressor). The video is 1 min and 11 sec. He enjoyed shooting the Uzi a little more than the MK (MK trigger was a little strong...

Had some fun with slow motion and camera angles. Click on the link for the high resolution version (44 Meg). http://filebeam.com/8a2dd97165bbcdd42df4a577c7a6fb79 For the low res version on youtube, click here: http://youtube.com/watch?v=GZ6Y1jPHP8Y&mode=user&search= Dan

I've been working off and on with this video for the past few months. It's been a fun project. I was striving to make a high energy "in your face" firearms video. I wanted it to be different than my Uzi video of last year. Before the question is asked by someone.... yes, I came close to...

Just picked up the Evo 9 from my dealer this week. I've shot approximately 120 rounds and reliability is 100%. Point of impact with the suppressor mounted is the same without it. I couldn't be happier with the combination. For a short video of it, click here...

Pretty cool video showing Glocks, Czs, AK, and bullets in flight - definately worth checking out. http://www.youtube.com/watch?v=G0VjdI_S_HM Dan

The sun was shining and the temp was about 70 degrees yesterday. I had to take advantage of the weather and shoot some video. Click on the link to check it out (it's 29meg): http://filebeam.com/b6fc64c1eea71a0b8db1ef6ae9ec976d Dan

Took some video of the Kadet with suppressor yesterday. If you're looking for an alternative to the Walther P22, this one makes for an excellent suppressor host. Click on the link to view it (it's 29 meg): www.mydatabus.com/6z/vk.argpbz.pbz/brownhen/CZKADET[87].wmv Dan _________________

Not too long ago the discussion of the Uzi closed bolt conversion and its cyclic rate was discussed. Since this topic surfaced again, it renewed my interest. My opinion was that the higher cyclic rate is attributed primarily to decreased length of bolt travel caused by the semi auto buffer...

I've re-edited the Uzi video and this one is longer at 3 minutes and 22 seconds (44 meg). I think it is a little more dynamic than the first. Much of it is the same, but I've used some new shots to make it more interesting. Click on the link: http://www.youtube.com/watch?v=2aax35iZsBU Dan...

Getting a new digital video camera gave me the motivation to try something different. Click on the link to check it out (it's 25meg). Turn up the volume for full effect. I'm posting this on a couple of message boards so I appologize in advance if it's a dup. http://media.putfile.com/bw11 Dan

I've read the cyclic rate discussions for a while now and finally decided to experiment with buffer lengths. I ordered my buffers from http://cdnnsports.com/ for $4.99 each. I experimented with two different thicknesses and the one inch buffer yields a nice cyclic rate. As stated by others, it...

Thought I'd post a few videos of the .22lr Ciener conversion kit. I shoot more .22s than 9mm and 5.56mm combined. Even though .22s can be finicky at times, they are too much fun (IMO) not to play with. Dan Without Suppressor http://media.putfile.com/Clip147 Suppressed...

Took my Father-in-law shooting and brought the M16, Uzi, and MK-760 along with a few silencers. He was very apprehensive of firearms, but ended up having a great time. He did extremely well - especially for being 74 years old. Here's the video of the MK-760 Dan

I acquired this grip from a guy who had purchased S&W76 parts directly from Smith and Wesson. It is made of a plastic type material and was told the grip is over 20 years old. It differs from my MK-760 aluminum grip by possessing the two ridges that fit around the rear of the trigger guard...

I went to the range today and took some videos. "Right Click" HERE and "Save" to see the MK-760 with and without suppressor. I put around 700 rounds through it today. Half of those were 147gr and the other half 115gr - all of those were my reloads. I had five feeding malfunctions with the...

Master Cast Bullet Company offers a variety of ammunition calibers. I'm interested in their 9mm subsonic for my Uzi (925 fps). The price is extremely competitive ($7.32/50 or $6.00/50 with your brass). Anyone have experience with this ammo? Or the company? Thanks, Dan

I attended the Piedmont, Alabama Machinegun Shoot yesterday and took videos of my Uzi and M16. The Uzi videos show the 22 conversion kit, the close bolt conversion, and the AWCMK9 suppressor. It was a great time and I highly recommend it to anyone who can make the drive. Click on the link to...

Here's my Walther P22 with suppressor. Anyone know where I can get a holster for it;) Dan