barrelxchange
UZI Talk Life Member
Just get a new bolt.
I have some I'll sell for $100 + shipping
I have some I'll sell for $100 + shipping
It's a registered bolt.Just get a new bolt.
I have some I'll sell for $100 + shipping
Is this an IMI registered bolt?Does anyone else have an SMG bolt with a dimple in the firing pin?
I'm having FTF issues and I don't know if it's broken or manufactured like this. It looks almost too perfect to be broken.
View attachment 39205
Thanks
has anyone ever had a full auto UZI pop off a 9mm round prematurely due to the primer being a pistol primer?I'd skip Federal 100 and 100M. M in this case stands for match, not magnum. Guys who shoot guns with light hammer strikes love Federals. A sensitive primer is about the last thing you'd want in an open bolt gun. Not just perfs, think OOB.
Since your gun is already perf-ing primers I'd skip SPPs and use SRPs. CCI 400 SR primers are good. WSRs are as well.
And/or at least give Rem 6-1/2s a try before dismissing because the 1-1/2s didn't work well. They are definitely not loose in our 9mm pockets. Quite the opposite, I can't get them to seat below flush in Norma .38 Spl brass, so run them down with a RCBS ram prime. Sick of doing that, so I discard Norma brass. Anyway, 6-1/2s have never loosened in 9 for us, and we loaded a variety of headstamps.
ETA: our Glocks have no trouble with 6-1/2s. Interestingly, have several thou Adcom Nato 9mm. Stuff misfires regularly in Glocks, but runs an Uzi like a sewing machine.
I never had a problem with neck tension. I generally reload LRN and put a really heavy taper crimp on it.
I always crimp in a separate station from seating
loading 9mm is kind of a waste of time when you can buy decent bulk ammo for 22 cents a round
I think my reloading cost is like 17 cents a round.
if you shoot 10 mags the cost difference is like 15 dollars.