what to do with 41ae bbl?

panaceabeachbum

Well-known member
Feedback: 5 / 0 / 0
Joined
Oct 16, 2006
Messages
1,672
Location
Panacea, Florida
I saw a thread on here asking about shooting other calibers thru the 41 ae bbl, cant seem to find the thread now , but it got me thinking, what do you do with one of the 41ae bbl?

I have one that came with my gun many years ago but recently picked up a spare , I havent seen affordable ammo , is there a use for the bbl outside of saying you have one?
 

UZI SBR AWC

Well-known member
Feedback: 4 / 0 / 0
Joined
Dec 27, 2002
Messages
2,092
Location
Troy, Ohio
Run a reamer in the chamber to 41 Spl/Mag (revolver cartridge), add M3 mag (45 lower) and 45 bolt, might be able to make it run ??

Or buy a load of 41 Mag brass, and have tool & die cut a but to run the bases down to 9x19 dimensions, and trim to length for bootleg 41AE brass.
 

wonderdog451

Well-known member
Feedback: 23 / 0 / 0
Joined
Jun 3, 2006
Messages
1,062
What if some enterprising individual,made up a true 40 caliber barrel liner and rechambered the barrels to 40 S&w or 10mm auto? That might be a decent solution.
 

UZI SBR AWC

Well-known member
Feedback: 4 / 0 / 0
Joined
Dec 27, 2002
Messages
2,092
Location
Troy, Ohio
wonderdog451 said:
What if some enterprising individual,made up a true 40 caliber barrel liner and rechambered the barrels to 40 S&w or 10mm auto? That might be a decent solution.

Troy will sell you a 40 or 10 barrel.... I have a 40 barrel for my UZI SBR..
 

wonderdog451

Well-known member
Feedback: 23 / 0 / 0
Joined
Jun 3, 2006
Messages
1,062
Troy has tod me that he is out of 40 caliber baarel blanks right now and it may be a while before he gets some in.
 

sonnydaze

Well-known member
Feedback: 2 / 0 / 0
Joined
Mar 3, 2004
Messages
256
Location
texas
they make realy good punches for removing ak barrel ,,,,, tape pennies to end so you dont mar chamber in ak barrel
 

tonelar

Well-known member
Feedback: 10 / 0 / 0
Joined
Feb 6, 2004
Messages
659
Location
Texas
use it as a blank to make a .45 barrel?
prolly more $$$ than it's worth
 

sharps_74

Well-known member
Feedback: 6 / 0 / 0
Joined
Jul 5, 2007
Messages
292
Noting what other have said, I would say that about the only thing to do with it is send it to me as a Chanukah gift, lol.
 

suka5168

UZI Talk Life Member
Feedback: 11 / 0 / 0
Joined
Apr 19, 2004
Messages
3,760
Location
Non NFA State
Is there anyway to make these barrel for a custom gun?
Have several barrels and 200 rds of brass.
PBB let me know what type of project we can come up with; a generic pistol or carbine rifle.
 

pdog

Well-known member
Feedback: 3 / 0 / 0
Joined
Jul 21, 2008
Messages
405
Location
Missouri
Drive it in the ground in front of your house and stick one of those lovely spinning flags in it.
 

Destiny

Well-known member
Feedback: 2 / 0 / 0
Joined
Jun 14, 2004
Messages
434
Location
Utah
Well..... why not convert it to a full auto barrel ?

Nothing says Capitolism and excessive consumption than being able to shoot .41 AE in full auto.


Destiny
 

colt_saa

New member
Feedback: 0 / 0 / 0
Joined
Feb 21, 2006
Messages
4
Location
Fort Lauderdale
I hand load for my 41AE. I bought brass some time ago. It is a nice cartridge, even at full auto. I think Starline was making it. Plus I had a case of a 1000 rounds from Samson.

I forget the powder charge, but the discontinued Remington 170SJHP left the UZI barrel right around 1300FPS. The 210 Plated FPs only move out at around 950.

However, I could use a few extra magazines at a reasonable price.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.

Please Visit our Sister Sites Below

Sister Board - Sturmgewehr Sister Board - MachinegunBoards


Please consider becoming an UZI Talk Supporter
Top