Vector UZI question.

tjw@wpe

Member
Feedback: 0 / 0 / 0
Joined
Jun 4, 2016
Messages
17
I have a full size full auto Vector UZI. My question is all most of these Vector UZI have a loose top cover that rattles? My IMI semi auto model A UZI is pretty tight fitting. Nothing rattles on that gun. My Vector UZI also had a folding stock that was pretty loose when in the folded condition. I purchased a refurbished stock from one of the online UZI parts vendors which quickly resolved that issue. However I have three different ratcheting top covers and all fit loose on this gun.
 

RoverDave

Administrator
Staff member
Feedback: 115 / 0 / 0
Joined
Dec 25, 2002
Messages
16,120
Location
ND
It was common for the Vector stocks to be loose when folded. Original IMI stocks fit much better, as you found.

It's also common for the top covers to have some slop in them. It's especially problematic if you try to mount optics on the top cover. You can fix it by bending the sides of the top cover inwards. A rubber mallet does the trick.
 

chipster

UZI Talk Life Member
Feedback: 0 / 0 / 0
Joined
Dec 5, 2006
Messages
812
TJW - fundamentally your issue is your Group Receiver and how (whomever did final assembly) the front sight base is welded in. I had a TON of play on my top cover to where it would wobble side-to-side and up and down at the front on my Group/Vector Semi 45 UZI. I ended up having 2 top covers welded by a machine shop to drop a bead of weld at the front and then they ground it down to where it is a perfect fit now. I'm happy to post a picture of this, but if you want a tight top cover you may need to have something similar done as no amount of bending of the top cover would have ever fixed the play I had.
 

tjw@wpe

Member
Feedback: 0 / 0 / 0
Joined
Jun 4, 2016
Messages
17
It was common for the Vector stocks to be loose when folded. Original IMI stocks fit much better, as you found.

It's also common for the top covers to have some slop in them. It's especially problematic if you try to mount optics on the top cover. You can fix it by bending the sides of the top cover inwards. A rubber mallet does the trick.



TJW - fundamentally your issue is your Group Receiver and how (whomever did final assembly) the front sight base is welded in. I had a TON of play on my top cover to where it would wobble side-to-side and up and down at the front on my Group/Vector Semi 45 UZI. I ended up having 2 top covers welded by a machine shop to drop a bead of weld at the front and then they ground it down to where it is a perfect fit now. I'm happy to post a picture of this, but if you want a tight top cover you may need to have something similar done as no amount of bending of the top cover would have ever fixed the play I had.

Thanks for the quick replies, aside from being a sloppy fit my Vector UZI is a good runner, she never jams and runs great. Its just a bit annoying that a firearm that cost as much as it did should rattle I am going to take one of the three top covers I have and do a little experimenting with it to tighten it up. I have a great machinist for a friend that I am sure could come up with a good solution Chipster, when you get time please post a picture of your welded top cover, thanks again!
 

chipster

UZI Talk Life Member
Feedback: 0 / 0 / 0
Joined
Dec 5, 2006
Messages
812
Crude, but effective. I had 2 done like this - this is the spare.

vectortop.jpg
 

tjw@wpe

Member
Feedback: 0 / 0 / 0
Joined
Jun 4, 2016
Messages
17
Crude, but effective. I had 2 done like this - this is the spare.

vectortop.jpg

Looks like a simple fix! I have a couple extra top covers so I can do that mod easily with a TIG or wire feed welder, thanks again!
 

SecondAmend

Well-known member
Feedback: 13 / 0 / 0
Joined
Apr 3, 2007
Messages
2,032
I have bent the front tab up slightly (sort of like the MAC owners do to "tune" the feed ramp). Did not need to add weld. It was pretty stiff, but not much movement was needed.

Best of luck, whatever you decide to pursue.

MHO, YMMV, etc.
 

tjw@wpe

Member
Feedback: 0 / 0 / 0
Joined
Jun 4, 2016
Messages
17
I have bent the front tab up slightly (sort of like the MAC owners do to "tune" the feed ramp). Did not need to add weld. It was pretty stiff, but not much movement was needed.

Best of luck, whatever you decide to pursue.

MHO, YMMV, etc.

I was thinking of doing that as well, I found that I have three of these ratcheting top covers, so I can do a bit of experimenting. I hate that something as expensive as this UZI should rattle! I got a refurbished UZI folding stock which cured that problem it has a minor issue with the locking rivet when its unfolded, its going to take a bit of working with some WD40 or penetrant of some sorts. It appears that whomever refurbished this stock they may have glass beaded it before the actual refinishing work was done, and in doing so it appears that the little spring loaded plug that pops out to lock the stock when its in the unfolded condition has some debris or crude in its hole causing it to stick.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.

Please Visit our Sister Sites Below

Sister Board - Sturmgewehr Sister Board - MachinegunBoards


Please consider becoming an UZI Talk Supporter
Top