Mini Uzi full auto bolts Available
- Thread starter scotty57
- Start date
Can you post the pictures of the "New" Mini Uzi bolts that you are getting in and the pictures of what you thought were semi-auto bolts? I'm guessing that we will be able to help you out and determine what they are. The more pictures/angles of the bolts the better.
Assuming that you have a registered open bolt sear, you should get the front bottom side of the closed bolt milled so you don't have to cut your sear. May also profile the striker arm to match the open bolt sear profile as well
Here is an old picture of some bolts I no longer own showing the difference.
Bottom one shows the relief cut.
Regarding the striker arm, just match the profile of the SMG sear so the geometry mates.
Bottom one shows the relief cut.
Regarding the striker arm, just match the profile of the SMG sear so the geometry mates.
Available
$67.00
Add To Cart
| UPC | RM-0091 |
| ID | 4630970 :: |
| Category | McKay Parts > Uzi Parts |
| Manufacturer | McKay Enterprises |
| Caliber | 9MM |
delta-10
Well-known member
I received this email a couple days ago (just saw it earlier this evening when I got back in town) and just now have confirmed with scotty57 that it was not sent by him.
"Good Evening,
I've got some Mini Uzi full auto bolts available for sale.
Are you still interested?"
The email address they used was toneitup1@hotmail.com and used the name of Thomas Stewart.
The real Thomas Stewart is a dealer who posts alot on Sturm. His correct address is toneitup@aol.com
Be real careful folks. People have been getting ripped off by impersonators lately and they find out what you are looking for by reading posts like this.
I recomend communicating with IM only until you know who you are dealing with. That way all messages are saved by the Uzitalk staff and that you have a far better chance of communicating with the real user of that account. Now if someones account gets compromised that is a whole different issue................
Be careful folks. I just about got taken for a ride.
The real Thomas Stewart just got back to me an confirmed that he did not send me that email and that it is a scammer.
04/30/2023
I received my recoil springs the other day. They look great, thank you. I eagerly await the Barrel Exchange bolts...........
"Good Evening,
I've got some Mini Uzi full auto bolts available for sale.
Are you still interested?"
The email address they used was toneitup1@hotmail.com and used the name of Thomas Stewart.
The real Thomas Stewart is a dealer who posts alot on Sturm. His correct address is toneitup@aol.com
Be real careful folks. People have been getting ripped off by impersonators lately and they find out what you are looking for by reading posts like this.
I recomend communicating with IM only until you know who you are dealing with. That way all messages are saved by the Uzitalk staff and that you have a far better chance of communicating with the real user of that account. Now if someones account gets compromised that is a whole different issue................
Be careful folks. I just about got taken for a ride.
The real Thomas Stewart just got back to me an confirmed that he did not send me that email and that it is a scammer.
04/30/2023
I received my recoil springs the other day. They look great, thank you. I eagerly await the Barrel Exchange bolts...........
Last edited:
THIS NEEDS TO BE A STICKY.
This type of scam has just recently been hitting numerous gun boards. I heard of a dude getting scammed for $4,500 in an ammo deal like this.
Last week after I replied to a WTS ad on Sturm some scammer emailed me back and proceeded to impersonate the original poster/seller …using a Hotmail address with the appropriate prefix.
Here’s how it works.
You publicly respond to a forum ad - “I’ll take it “or “PM sent” or whatever. The scammer then goes and creates an email VERY similar to the real seller. Then the scammer scrapes the internet and esp that gun board until they find your email. Then they email your email from their scam email sealing the deal and telling you how to pay.
Be warned.
This needs to be spread far and wide.
trilogymac
UZI Talk Supporter
barrelxchange
UZI Talk Life Member
People will pay top dollar for something that is genuine IMI from a collector perspective. I know you already know all this...Just posting for anyone else reading that may not be familiar with barrelxchange.
From a shooter's perspective, I would say your Mini bolt is superior to an IMI Mini bolt since they are modular and you can play with the weights to go super fast or slow down to make the Mini have a totally different feel or even match a factory bolt if that is what you want.
I need to do another cyclic rate test as it has been a long time. I think I got 1749 RPM running my Micro in closed bolt but the closed bolt is not as reliable as open bolt. In addition, closed bolt UZI's don't take advantage of API which absorbs the initial recoil impulse like open bolt does and I personally never liked full auto UZI's in closed bolt because of that....(actually don't like closed bolt UZI's period. Semi auto closed bolt UZI's have the same problem).
For those that don't know a closed bolt Micro and closed bolt Mini use the same recoil spring assembly and have the same bolt assembly travel distance so cyclic rate is the same.
Going with no weights in the barrelxchange heavy bolt should yield a very high cyclic rate yet retain the reliability of open bolt as well as taking advantage of the API principle for a smoother impulse.
Is it a 'true' IMI configuration? No, but from a shooter's perspective...who cares.
I did this test a long time ago but can't the posts or documentation on it so will try to do it again.
I also have high speed camera now that will do 960 FPS in HD quality so it would be interesting to see a comparison of a closed bolt Mini vs LW open bolt, vs standard vs heavy.
Always been pleased with everything I got from you.
Last edited:
The bolts are IN! For your convenience they are on my website. There are two types, the original with the "feet" and they sent me several without feet. There are not a lot, so when you submit the order, Please in the comments Not your from UZITALK, or i will cancel you order, and refund your money. You will receive tracking within a day or so of ordering.
https://products.mckay-ent.com/mcka...l-auto-9mm-mini-uzi-bolt-without-feet-4676397
https://products.mckay-ent.com/mcka...full-auto-9mm-mini-uzi-bolt-with-feet-4676410
https://products.mckay-ent.com/mcka...l-auto-9mm-mini-uzi-bolt-without-feet-4676397
https://products.mckay-ent.com/mcka...full-auto-9mm-mini-uzi-bolt-with-feet-4676410
Please Visit our Sister Sites Below
Please consider becoming an UZI Talk Supporter