Mag' Changes with the VERSA-11 and EVO Scorpion Magazine Module

strobro32

UZI Talk Life Member
Feedback: 71 / 0 / 0
Joined
Sep 4, 2007
Messages
8,219
iu
 

TheColtCollector

UZI Talk Life Member
Feedback: 13 / 0 / 0
Joined
Jun 15, 2015
Messages
1,413
Location
Asheville, NC
Does the suomi stick only version come with a push bottom? I just want those double feed stick mags and stripper clips. I don’t care about the drugs
 

m11stuff@hotmail.com

UZI Talk Life Member
Feedback: 44 / 0 / 0
Joined
Nov 30, 2004
Messages
2,247
Does the suomi stick only version come with a push bottom? I just want those double feed stick mags and stripper clips. I don’t care about the drugs
There are two versions of the Suomi stick Magazine Module. One with a lever behind the magazine to activate with your thumb while pulling the mag’ out and the other has left and right push buttons to push with with your trigger finger to drop the mag’ free.
 

Stefan1235

Active member
Feedback: 2 / 0 / 0
Joined
Nov 28, 2023
Messages
28
Location
Texas
They are both equally reliable. I prefer the Glock mag’s for quicker mag’ changes, though.
Is there a feed ramp built into the upper, or a part of the magazine modules? Curious how the bolt and feed geometry is setup to accommodate both single feed and double feed magazines equally reliably.
 

m11stuff@hotmail.com

UZI Talk Life Member
Feedback: 44 / 0 / 0
Joined
Nov 30, 2004
Messages
2,247
Is there a feed ramp built into the upper, or a part of the magazine modules? Curious how the bolt and feed geometry is setup to accommodate both single feed and double feed magazines equally reliably.
Yes, there is either a single feed or double feed, feed ramp in the Magazine Module sending on what mag’ it is designed for.
 

TheColtCollector

UZI Talk Life Member
Feedback: 13 / 0 / 0
Joined
Jun 15, 2015
Messages
1,413
Location
Asheville, NC
There are two versions of the Suomi stick Magazine Module. One with a lever behind the magazine to activate with your thumb while pulling the mag’ out and the other has left and right push buttons to push with with your trigger finger to drop the mag’ free.
Do you have a video/pic of the Suomi stick mag with a mag inserted?
 

Hill Raiser

Active member
Feedback: 1 / 0 / 0
Joined
Dec 7, 2017
Messages
39
Decided on a Versa12 EVO and I was planning on the push button, but this cements it. Looks more ergonomic and just plain looks better too.
 

Quake Guy

Well-known member
Feedback: 1 / 0 / 0
Joined
Oct 6, 2010
Messages
390
Did the module pricing change since SAR show? At least for the drum?
 

Gaujo

UZI Talk Supporter
Feedback: 10 / 0 / 1
Joined
Sep 11, 2013
Messages
4,378
Location
Raleigh, NC
Richard would you consider doing a long version with the 8" barrel and a longer handguard? Figured I'd ask as it it would seem it longer requires a different upper and should be cross compatible between the M11/9 and M11/a1.
 

m11stuff@hotmail.com

UZI Talk Life Member
Feedback: 44 / 0 / 0
Joined
Nov 30, 2004
Messages
2,247
Richard would you consider doing a long version with the 8" barrel and a longer handguard? Figured I'd ask as it it would seem it longer requires a different upper and should be cross compatible between the M11/9 and M11/a1.
It’s possible. Depends on demand. The trend in the past five years has been towards the shorter uppers. We sell way more “k” versions of our uppers than standard uppers. With an 8” barrel, the rate of fire will be higher and recoil will be harsher.
 

Jmacken37

Mr. Miata, UZI Talk Life Member,
Feedback: 103 / 0 / 0
Joined
Nov 12, 2005
Messages
5,192
Location
SE MI
Did the module pricing change since SAR show? At least for the drum?
I doubt Richard knows 😂; best to ask the expert…Jackie.

That being said, as Vegas SMG (RIP friend) used to say, these are the good old days and in the two decades I’ve been in the NFA world, prices have steadily increased. Buy as much as you can afford now!
 

Please Visit our Sister Sites Below

Sister Board - Sturmgewehr Sister Board - MachinegunBoards


Please consider becoming an UZI Talk Supporter
Top