Full size uzi kit build

3HFirearms

New member
Feedback: 0 / 0 / 0
Joined
Dec 4, 2024
Messages
2
Location
Texas
07/02 built uzi and the bolt is lightly hitting the barrel. I am not real confident in the feed ramp I bought. the barrel is seated on the ramp and the bolt is flush but will not feed if more than one round is loaded no matter magazine used. If I load more than one round, the round will hit either left or right on the barrel based on even or odd number of rounds. If some one could provide the proper dimensions for the feed ramp and advice would be appreciated. I am going to open the barrel feed angle to 100 degrees. Also the bolt is touching the barrel as it closes. But not going to adjust till I know the feed ramp is correct

Thank you in advance
Loren Henry
3H Firearms
Huntsville Texas
 

Please Visit our Sister Sites Below

Sister Board - Sturmgewehr Sister Board - MachinegunBoards


Please consider becoming an UZI Talk Supporter
Top