forty round mags

RoverDave

Administrator
Staff member
Feedback: 115 / 0 / 0
Joined
Dec 25, 2002
Messages
16,120
Location
ND
TSMG, welcome to UZI Talk!

You're asking a difficult question. The dream of reliable, reasonably priced 40 round mags is elusive.

As osprey21 points out, the FM (argentine) 40 round mags are about the only option that can be reliably found. They aren't actually made for the UZI (which you can see because the mag stops don't come anywhere near the grip frame) but work pretty well. They are generally reliable but often times they are very tight to get into the gun. The nice thing about buying from Vector is that if you get some tight ones you can exchange them. They're also constructed of lighter material than an original IMI mag and probably won't last as long. But chances are you'd get a lot of good shooting out of them. There are some South African 40 round mags being advertised that work in an AR-15. Those are the same Argentine mags but have an extra mag catch slot cut in them after the mag was originally manufactured.

Other options are the South African mags that Group Industries imported, but there are very few around. (Not the same as the ones mentioned above.) Also, I ran across some 40 round Mec-Gar mags that I sold to members in a special offering, but again they are hard to find.

Stay away from anything made by USA!

If you haven't already, check out our magazine identification thread.
 

stymie

FFL/C&R, UZI Talk Life Member,
Feedback: 6 / 0 / 0
Joined
Mar 13, 2003
Messages
3,498
Location
Missouri
TSMG...

FWIW... IMI experimented with the 40rd magazines... but dropped them as they were never able to achieve the level of reliability that was acceptable. Some of the other 40rd mags are either too tight in the mag well or they have to be pulled down to function correctly.
 

jamesbond

Member
Feedback: 0 / 0 / 0
Joined
Apr 30, 2003
Messages
13
Location
Philippines
I got magazine that says 9 and has a tool mark of IMI under it...Is this magazine made by FN or other companies contracted by IMI? how much they worth now? Thanks!
 

KarlPMann

Banned
Feedback: 0 / 0 / 0
Joined
Dec 25, 2002
Messages
1,657
jamesbond said:
I got magazine that says 9 and has a tool mark of IMI under it...Is this magazine made by FN or other companies contracted by IMI? how much they worth now? Thanks!



That's a standard IMI mag. Here in the US, a 32 with those marks go for $35 - $40. I would assume mags aren't as big a deal there though. Karl.
 

M60joe

FFL 07/02, UZI Talk Life Member,
Feedback: 30 / 0 / 0
Joined
Mar 18, 2003
Messages
1,578
Location
Ohio
stymie said:
TSMG...

FWIW... IMI experimented with the 40rd magazines... but dropped them as they were never able to achieve the level of reliability that was acceptable. Some of the other 40rd mags are either too tight in the mag well or they have to be pulled down to function correctly.


I have some 40's from Vector and the mag lips were too tall. I had to massage them to get them to work.

"Massage" bent the lips over and re mill the distance between them.
 
Last edited:

al nukem

FFL
Feedback: 4 / 0 / 0
Joined
Mar 12, 2003
Messages
233
Location
pgh pa
You guys ever see the ones with the bird in the triangle on them, they were parked. They run great in my Mini SMG!
 

KarlPMann

Banned
Feedback: 0 / 0 / 0
Joined
Dec 25, 2002
Messages
1,657
al nukem said:
You guys ever see the ones with the bird in the triangle on them, they were parked. They run great in my Mini SMG!


You obviously haven't checked out the mag toolmark thread. :nono For shame, we put all that work into it, and you don't even use the reference section. Those are GI imported mags from Lyttleton. Karl.
 

Mick Porno

Well-known member
Feedback: 0 / 0 / 0
Joined
Apr 10, 2003
Messages
70
Location
richmond va
joeblack said:
I have some 40's from Vector and the mag lips were too tall. I had to massage them to get them to work.

"Massage" bent the lips over and re mill the distance between them.

************************************
i have some 40's from cdnn...**don't know the manufacture** and i have the same problem with 3 out of 4 of them.....am currently working on them to see if i can make them reliable....looks like bending and grinding are in my future....
 

RoverDave

Administrator
Staff member
Feedback: 115 / 0 / 0
Joined
Dec 25, 2002
Messages
16,120
Location
ND
mickporno said:
************************************
i have some 40's from cdnn...**don't know the manufacture** and i have the same problem with 3 out of 4 of them.....am currently working on them to see if i can make them reliable....looks like bending and grinding are in my future....

The only 40's I've seen CDNN sell are the Argentine FM mags.

As far as bending and grinding goes, that's more than I want to know about your personal life.
 

Mick Porno

Well-known member
Feedback: 0 / 0 / 0
Joined
Apr 10, 2003
Messages
70
Location
richmond va
RoverDave said:
The only 40's I've seen CDNN sell are the Argentine FM mags.

As far as bending and grinding goes, that's more than I want to know about your personal life.

*****************************************
and are these Argentine FM mags typically any good or am i wasting my time.....even so i'm sure i'll continue with the bending and grinding as the girlfriend is very athletic....
 

KarlPMann

Banned
Feedback: 0 / 0 / 0
Joined
Dec 25, 2002
Messages
1,657
Personally I wouldn't bother to modify them, I'd return them and ask for a replacement that fit properly. They supposedly guarantee them to fit and function in the UZI. Karl.
 

Mick Porno

Well-known member
Feedback: 0 / 0 / 0
Joined
Apr 10, 2003
Messages
70
Location
richmond va
KarlPMann said:
Personally I wouldn't bother to modify them, I'd return them and ask for a replacement that fit properly. They supposedly guarantee them to fit and function in the UZI. Karl.

******************************
REALLY??....CDNN??.....will it make a difference that i've had them for about 6 months?.....they don't advertise them in the catalogs anymore....i tend to think they don't have anymore.....

CDNN doesn't strike me as a **we aim to please** kinda business.....more like what you get is what you get.....
 

KarlPMann

Banned
Feedback: 0 / 0 / 0
Joined
Dec 25, 2002
Messages
1,657
Well, I could be wrong. But I recall several people selling them, Vector, CDNN, maybe others. I thought they all were claiming to guarantee them as I recall. Call and ask. Karl.


PS, nice new name :lol Thank the UZI-Talk GOD that did it. :biggrin2 No, not me either. Karl.
 

Mick Porno

Well-known member
Feedback: 0 / 0 / 0
Joined
Apr 10, 2003
Messages
70
Location
richmond va
KarlPMann said:
Well, I could be wrong. But I recall several people selling them, Vector, CDNN, maybe others. I thought they all were claiming to guarantee them as I recall. Call and ask. Karl.


PS, nice new name :lol Thank the UZI-Talk GOD that did it. :biggrin2 No, not me either. Karl.

***********************************
ok i'll give em' a call....it can't hurt to ask.....and yes thanx to the uzi god for the name change.....:)
 

RoverDave

Administrator
Staff member
Feedback: 115 / 0 / 0
Joined
Dec 25, 2002
Messages
16,120
Location
ND
Mick, I'm pretty sure other members have said that CDNN did an exchange, but you are correct that they are no longer advertised so if they're out then an excahnge would be impossible.

The biggest problem with the Argentine mags is that they can sometimes be a very tight fit in the mag well. (Some might consider bending and grinding to be the appropriate way to deal with a tight fit but I can't recommend it in this case.) When the Argentine mags do fit, they seem to run okay, though they are made of lighter material and I suspect that over time they could be a problem. The other problem is that the mag stops are too low on those magazines and do not contact the mag well, which could be why your mags appear to be too tall - they're going in too far.
 

Mick Porno

Well-known member
Feedback: 0 / 0 / 0
Joined
Apr 10, 2003
Messages
70
Location
richmond va
RoverDave said:
Mick, I'm pretty sure other members have said that CDNN did an exchange, but you are correct that they are no longer advertised so if they're out then an excahnge would be impossible.

The biggest problem with the Argentine mags is that they can sometimes be a very tight fit in the mag well. (Some might consider bending and grinding to be the appropriate way to deal with a tight fit but I can't recommend it in this case.) When the Argentine mags do fit, them seem to run okay, though they are made of lighter material and I suspect that over time they could be a problem. The other problem is that the mag stops are too low on those magazines and do not contact the mag well, which could be why you mags appear to be too tall - they're going in too far.

********************************
yes that is exactly what is happening....
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.

Please Visit our Sister Sites Below

Sister Board - Sturmgewehr Sister Board - MachinegunBoards


Please consider becoming an UZI Talk Supporter
Top