9mm mag block adapter for m16

UZI SBR AWC

Well-known member
Feedback: 4 / 0 / 0
Joined
Dec 27, 2002
Messages
2,092
Location
Troy, Ohio
Bolt pics

This is a typical Colt pattern 9mm bolt, as offered by Colt-RRA-ASA-Garrison Mfg:
fbb78601.jpg



This is a pic of a "ramped" Colt pattern 9mm bolt to allow any hammer to be used in semi auto, and eliminate any chance at "trigger bite" and broken hammer/trigger pins,,, blue line shows the ramp, red circle shows the surface that is the problem for std notch face AR-15 hammer. (base photo courtesy of joeblack):
fbb7fbdb.jpg




For the Olympic system, simply disregard the bolt sticking out the front of an AR15/M16 bolt carrier for a moment, and look at the carrier itself, that is what the Olyimpic looks like, but with a caliber specific head attached to the front of the carrier body, and a weght stuck inside the rear of the carrier. They use an AR carrier for semi, and M16 carrier for auto, just the carrier is lacking a few steps of machine work that the gas operated would get.


EDIT- I lack proper spelling habits a lot of times.
 
Last edited:
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.

Please Visit our Sister Sites Below

Sister Board - Sturmgewehr Sister Board - MachinegunBoards


Please consider becoming an UZI Talk Supporter
Top