Search results

Thanks for the input everyone!

For elevation: Turning the front sight clockwise (turning right) moves the point of impact up. Turning the front sight counter-clockwise (turning left) moves the point of impact down.. For Windage, If the point of impact is 1" to the right, You would move the front sight post slightly to the...

i had a company make an adapter that goes over the thread.. Cant remember the name of the company that made the adapter...this was like 14 years ago.. Misplaced the adapter when I moved....or left it at the range... So you dont really have to replace the rear mount... I cant remember the thread...

Amphibian, And other members..... What is the actual thread pattern on outside of AWC MK9 can? Bixler 3-lug goes over it.

There are plenty of company that make thread adapter or custom thread adapter. Liberty suppressor is one. I have used TROS in the past...but not anymore. Turn around time is too long.. Tros was main player...but NOT any more. I had Mk9 AWC as well with bixler 3 lug.. Clean yourself. Ed REd./...

Interested!

So I can replace my full size uzi bolt for a min-uzi bolt to increase the ROF? Any other modifications needed? Any increase in wear Thanks

I'll take it! Please PM your information

Thanks for catching that.. Totally missed it. I edit the title. "OPEN BOLT".

Hi all I have a register receiver MODEL A Full size uzi. It still has the restrictor ring. Uses Semi barrel. I know with GROUP INDUSTRIES bolt, you do not need to make modification to it. For other bolts, what modification do I need for the replacement bolt to work in this UZI? I am assuming a...

Thanks for the input everyone. Will purchase Silencerco Spacer.

Have this barrel. When mounting WOLFMAN using 1/2x28, the suppressor stops at the end of the thread. Doesnt contact the shoulder because there are no threads all the way to the shoulder. Would it be fine to shoot? Would I need a spacer? Or the threads on this barrel is too long in...

Thanks for the video!!! It helped.

Greetings all. Have a BWE top cover with pic rail welded to it. The rail protrudes slightly over the ejection port. I am familar with adjusting the SMG top cover without a rail...but it appears the rail is in the way. Gap is approximately .022" in the rear and .016" in the front. Trying using...