Search results

Samson makes a repro shorty ac556 sight in blued as well. This link is a supporting vendor here. https://www.robertrtg.com/store/pc/SAMSON-AC-556-STYLE-GAS-BLOCK-FRONT-SIGHT-FOR-2007-AND-EARLIER-MINI-14-30-STAINLESS-p12845.htm

Haven’t seen many for $500 lately. $750 is what I see selling, most are listed for much higher but the sit forever.

Just a note I find +1.5% is what I scale from a CAD file to the Cura slicer when casting aluminum from a 3D print. Don’t want to derail this thread, just pointing out my findings on what I said.

Basically that some guns imported as pre-86 dealer samples were deemed by the ATF to be transferable. That means a chunk of samples are now added to supply, and holders of those (previous samples) now have something worth considerably more as a transferable.

Typo, probably 129 for an old school 9mm can with big volume and a wipe. New stuff 9mm just baffles is in the 120s range. Rimfires are in the teens, so doubt the typo is 119

Awesome 🇺🇸 Rare surprise

I agree with leaving it alone. The tabs get egged mainly when the bolt slams home on an empty chamber. The sear/selector pin holes egg too, mainly each time you let off the trigger and the bolt engages the sear. With an empty gun, while looking at the selector switch… pull/release the trigger...

$1625 + tax/etc Strong money for a new user on GB. 🇺🇸

Some data… the 31 series uppers in the m11 and m11/9 are similar. There’s a 2” spacer in the m11/9 upper to make up for the extra travel that doesn’t exist in the m11a1, so that means both versions share the same bolt and the following thread applies- See post # 11...

If you want 9mm in a stock style upper you need a tungsten CFWa bolt there’s no other way. You will damage the welds on the backplate using a steel bolt. A babyghost upper will be the same speed as stock, it’s just has more features. I’ve shot an A1 with CFWa in 9mm forgot exactly but was a...

here’s a link to your auction. Hope someone here gets it! https://www.gunbroker.com/item/1068462658

It’s mainly the corner portion of that 1st serration creating the pressure point. If that 1st (or even 2nd) serration didn’t exist this grip would fit almost like a glove. Noticeable improvement over the old grip and light years ahead of the factory profile.

Here’s a before: and after: a little more svelte love it except for two things… 1st, this nub is in the wrong spot. The smooth area below the trigger guard can only fit a finger of a woman, a normal sized middle finger will engage this nub and it’s uncomfortable in that spot just...

If selling on the gunbroken site without mags: $1500 or less if you want fair. $2200 if you want to keep it a long time. $.01 starting bid if you want unbridled Capitalism. 🇺🇸

Look at post #16 and tell me if you could hit those plates without an optic or irons. With optics you can.

I paid $20 each for mine maybe 3 years ago. Z-mags are $35ea so that’s your competition.

I always leave a note on each one for future reference.

I agree those are PAM2 mags. I have some marked similar. if you want to sell them cheap send me a message. I take the heavy duty springs out and use them in newer Zmags that have weaker springs.

It never was a phone booth gun if the shooter had any skill. Always thought that phone booth comment was a stupid saying. They don’t call the mini-uzi a phone booth gun. This steel plate I knocked down has withstood 2 other smg hitting it at the same time. Yet my phone booth gun does it by...

^ Recipe?