Search results

I bought one and never had a problem. Its kinda like buying a saiga shotgun. It may be good but there are some bad ones in the bunch. Have him shoot it for sure unless its a friend then just beat him with it if its crap

The problem is the front trunion. I have found galil stamped receivers but I havent found anyone that sells a front trunion that would be compatible with the milled kit. Good luck. I'm going to keep an eye on this thread because I want to know too

Original MSA adapter I bought one of the original MSA adapters and the problems weren't with the adapter, it was the century receivers. They were out of spec on the exterior of the receiver, atleast mine was. They were not flat. All it took was a little filing to flatten out the base of the...

Brownells not brownsville

You can find a .45 truing rod at Brownsville and slide it down your barrel,then attach the can. You should be able to see if it's rubbing on one side as it screws on which is misaligned threads or if the hole wobbles it is the hole in the can off center

that gives me an idea good job

check out chaos website. he makes an upper like that, dont know about fitting over a can. http://www.chaosus.com/cgi/commerce.cgi?preadd=action&key=TITAN_QUAD_RAIL

steel coated tula ammo reduces drag so the chamber could be buggered if the tula works and nothing else does or.... the tula is ejecting slower so it has a bit more time to clear which would be an ejector problem. go to your range and point the barrel down rang and hand cycle the tula through...

i added .40 as well. had 2 approved

All I can find is century, Searched here, found no answers. APEX kits are $290 with barrel

i lust put in my 40 barrel and thats it, both mine run great

numrich e-gunparts?

My 40sw mags are from Barrelxchange. Ask him if he makes his or if they are 41ae

Has any one seeen the new uzi pro? Just got an email talking about it on gun reports http://www.gunreports.com/news/news/IWI-Israel-Weapon-Industries-Uzi-Pro-sub-machine-gun_2367-1.html?ET=gunreports:p795:162320a:&st=pmail has an older IMI in the video. heres the link...

Hey Nathan Glad you're back. My galil adapter has been great, it was the bad receiver that needed work. can't wait to see what you have coming down the line scott rogers

sorry, 33 is way to young

I got my galil piston from cnc warrior. http://www.cncwarrior.com/comersus/store/comersus_listItems.asp?idCategory=59

Apex gun parts, Romanian 35.00 https://www.apexgunparts.com/product_info.php/cPath/21_89/products_id/1299 I got the m70 stainless for mine 35.00, works great https://www.apexgunparts.com/product_info.php/cPath/21_71/products_id/832 Remember, the standard Ak 47 carrier is what you want , not the...

I have a vector and I had a soft strike problem that they bent over backwards to make right at no cost to me

I have a GAL receiver and had to square up the base of the receiver and the front of the mag well and truniion. I also had to do a little work on the front of the adapter. go slow and take a little material at a time. works great. GAL aren't original anyways so it didn't bother me that I had to...