Search results

I respect your opinion as always strobro32, but in my experience I have found that the Uzi converion is possibly one of the best out there. That is if you follow the recommendations for tuning. My personal uzi has been subjected to teenage boys and has hardly missed a beat.

How strange. From your description I was certain it had to do with mag height or maybe top cover gap. Perchance have you looked at the ejector channel on the bad bolt? Was it hanging and slowing when traveling over the ejector? Did the bad bolt always have the problem or was it fine and...

There were some newbie buyers on those Uzis. A slotted bolt conversion for over two grand more than a Group and four grand more than a SWD bolt uzi? Yep someone had auction fever.

Back in 2007-08 timeframe I had CS Metal Werkes do a full refurb alignment on my m11. I similarly had a bolt round off and had a couple runaways. Since that service I have had no problem with any upper or bolt from 380, 9 mm, or 556. That being said I don't think their Mac guy is still there...

Damn, I thought I was lazy when I bought a second receiver. Four? I must say I am envious.

I can only think off my head about two magazine fed single shots. Fiala pistols from the 20's were mag fed single shor 22s. https://www.gunbroker.com/item/1045731663 The LM4 Simmerling was a single shot mag fed 45. It wouldn't work probably because the slide goes forward to reload...

22 Hornet, 22 Remington Jet, 221 Fireball, 223, 30/30, 308, 9mm Luger, 38/357, 41 Magnum, 44 Special/Magnum, 45 ACP, 45/70, 458 Win Mag I load on a Lee Turret and keep 6 of these permanently in their own turret. Others( .e. 22 RemJet) get loaded very sporadically and get put in a spare turret...

I have four 28s and a 20. The 28s are lined with plastic inserts and if clean and lubed with dry silicone they work flawlessly. The 20 has aluminum inserts instead of plastic and it works poorly. The follower binds up on the the aluminum and it stops feeding. I don't know exactly how they...

Show up at my house with a six pack. Let me know first because I'm out of C25.

Either place it all on Gunbroker with a reserve or sell the stock 11/9 alone and everything else right here on Uzitalk. You have some high value pieces there. M11/9 - 10,000 for a reasonably quick sale K Upper - 800 -1000 22 Kits - these have gone for as high as 2,000 here and higher on...

I wish you were here in Missouri. You could come over and after a couple beers and an hour in the shop we could get that thing running right. OP you chose right. Whether it's a Group or a Vector, you are assured that it was a full auto from the start. My Vector has never skipped a beat in...

The last bolts made were shipping in Summer of 2021 from Practical Solutions. I looked up my my invoice from June 24, 2021. "The CF-W9mmA bolts are here and we are assembling them now. This means it's time for you to pay and confirm your configuration. Sometimes I and/or customers get...

I would recommend reading over the original written directions to tune these line by line. https://www.uzitalk.com/forums/index.php?threads/22lr-conversion-kit-tuning-procedures.72204/ You sound like you are very close. Using those instructions I've been getting mine as close to 100% as I...

I built a potato cannon completely inside of a demilled spanish bazooka. It even uses the original trigger where I built a bracket to hold a couple piezo igniters. I always meant to build one in a LAW tube.

When I bought my M11A1 in 2006, the hole was slightly oval. I ran several thousand rounds of 380 through it. When I got one of the first Lage 9mm uppers the hole was still sligthly oval. I then ran thousands more rounds of 9mm through it. When I got my Max 11A1/15 the hole was still slightly...

In your circle, the part on the right is a cocking knob and the part on the left is the magazine release.

Apparently I read too quickly. I applaud your efforts and will let you know if I see any. If you don't have one, I would recommend picking up an AR-180. They have an interesting history and but for a few small faults are great rifles.

Just so you know, none of those guns were from the assault weapons ban (1994-2004). They all predate the ban. There were some real oddballs in the 80s. May as well throw the ARM pistol, Gwinn/Bushmaster Assault Rifle, and the Bushmaster M17 on your list. For an example of a true AWB gun look...

What a great memory. I as well bought the fifty pack. As I recall with shipping it came out around $5 a mag. My box ended up having 52. 50 were about perfect with a little freckle rust. The remaining two looked as if they had been left in a puddle of blood. They were not only rusty, they...

I did misunderstand you, please have my apologies.