Search results

Most 22LR setups will require some tinkering and I'd say avoid 22LR MG's if you are the impatient and non-tinkerer type. The LM7 is my most finicky setup but as shown in the video above, it can run very well if you have the patience and resources. It is probably the most gratifying when...

Totally agree. My first MG was a RR AMT Lightning (stainless clone of the 10/22) that Norrell converted to his system. I got this during the 1994-2004 ban so your only choice was pre-ban plastic mags. Norrell's recommended mag was the steel lip Butler Creek mags and a close second was the...

Which 100 round drum? Are you referring to the 110 Round GSG drum? I didn't know if those were reliable in a FA 10/22.

IWI still imports the UZI Pro w/ a threaded barrel: https://iwi.us/firearms/uzi-pro/ I wish they brought the Mini back.

That is a very hot load. I wouldn't reuse that brass.

I shoot all my SMG's 99% of the time suppressed. However, when I do my chronograph testing, I test with NO suppressor mounted since some cans will have some 'free bore' boost to it and I don't want the data to be skewed with whatever can I have mounted. As mentioned, I am more concerned about...

Yes, I think my hybrid RDB Dissent is the best 9mm M16 option today: https://c3junkie.com/?page_id=361 Who knows about tomorrow.

One of my buddies had a Mini that was bent really bad. Like a banana. Sent it back to Vector I think 3 times back when Ralph and Rex were there. Ralph ended up graciously swapping his personal Mini for my friends.

I was just thinking that if it works fine w/ an open bolt then you can probably rule out any issues with the topcover, barrel, feed ramp, feed height, lower etc...

I would do that in conjunction w/ an open bolt as well not just the sear....assuming you meant that.

I would assume the same would happen with Closed bolt semi. However, still curious if it happens with open bolt as I don't shoot my Mini in closed bolt much. I have seen it have those malfunctions but I don't shoot it enough to really care. I've been meaning to run my Mini in closed bolt...

That looks like a full auto closed bolt. I presume this is a post sample or RR gun? If so, have you tried running it with an open bolt?

Best is relative. Best proven is the MP5 as it is a proven classic. I like my hybrid Dissent as documented in my link below is my favorite right now since it is extremely tune-able and 'sustainable'. Link to my OLD CMMG RDB Banshee setup: https://c3junkie.com/?page_id=280 Fixed ejector on...

I'm not that familiar with the Max10/15 but I had a friend that had a Max11/15 and got one of those Dolos quick change things for his. Have you considered getting that or an equivalent quick change barrel setup so you can quickly swap barrels? As I have documented here...

Micro / UZI Pistol bolts have the relief cut on the top and the Mini's do not have that. Here are some links: https://uzitalk.com/reference/pages/bolts.htm https://uzitalk.com/reference/pages/closedbolts.htm

Are you going to suppress it?

Thanks...btw, I just updated my website with some data I had regarding COL and stuff. My website is really just a place for me to put my own notes... https://c3junkie.com/?page_id=2324

I just put some stuff up on my site: https://c3junkie.com/?page_id=2324 I was surprised to see that my stainless 9mm M16 8.5" barrel is getting higher velocities than my IMI 9" UZI barrel.