Search results

I'm not sure if I have an early model Fat Ghost upper (or if something is broken) but my charging handle does not actually spring back forward when let go at the rear position- after I learned they were supposed to do that, I took it apart and didn't even see how it would/should mechanically...

I still await your book!

Not linkable straight from the page unfortunately; however, here’s a screen recording I’ve uploaded to Imgur

Sure enough - I clicked away when the first credits rolled. RL must be a Marvel fan LOL Also see that it's saying AR22 mag or Ruger 10/22 mag fed- I'd be willing to bet the AR22 would be the third upper on the back of the table

Lage just posted on their Facebook (12/5/25) that they are at the SAR show at the Arizona Fairgrounds....a subtly posting the fact they now have a belt fed and 10/22 upper. There also appears to be another new upper on the table behind the belt fed but not clear enough to distinguish platform...

I have a file I'm 95% done with; it's a 1/1 dummy clone of my M10A1 with the Uzi Grip/Mag conversion. Will use as a display lower that I can affix to separate uppers/stocks for better wall display. Will look a lot better than just spare uppers/stocks mounted to the wall. I've printed 3-4...

Now this is cool

Looks like it either sold elsewhere or someone messaged about the fakeness and he removed the listing lol

Nor have I - it’s has been so carbon fouled i hadnt even noticed it until now. I guess I’ll bust out the elbow grease later to clean it up and take better pictures for documentation!

Speaking of the feed ramp, in my limited experience I have only seen the weld in style feed ramps offered, but never a bolt on option like is installed in my receiver. You can see (ish)- it is a hex head bolt going through (red indicating direction) into a threaded plate (blue indicating the...

In this case where I stated it was close, if not already passed the sear, was wrong- the stroke length of the 10/31 is evidently significantly longer than I was anticipating. Once I cleaned up the feed ramp edges, the bolt was able to travel another 3 inches or so to actually catch the sear...

Update- grinded off maybe 1/16 of an inch total on both sides of the feed ramp ears. Took about 9 grind and test fit sessions to make sure i didnt remove too much. Polished it off and am now good to go and upper test functions fine. Also tested on all other uppers so no issue there either.

After some additional tinkering, appears the bolt is hitting the outer edges of the double feed feed lip. Odd the mk2 upper doesnt have the same affect considering both are double feed bolts. We’ll see if i can get the carbon locked feed lip removed for grinding, otherwise looks like ill just...

Forgot to mention- no VBS installed. Seems like its either right at the cusp of being caught by sear, or already past and not being caught

New to me 10/31 just came in today. Went to function check and I am unable to get the bolt to actually lock back in the open position. It goes far enough rearward to pick up a round, so if I went to live fire I am sure the entire mag/drum would be emptied. Anyone ever seen and/or fixed this...

MWG once again with the coolest post of the day! Love the history behind them

Lots of cool stuff indeed! Wish I could stumble on a honey hole like this!

Sounds like he had them all at some point and acquired parts for them at the time of ownership and no longer has the firearms themselves, but a drawer full of unlabeled parts

IIRC SCA only made the M11/9 versions

Nothing too crazy out of the norm. Wood stocks are always neat. The SCA suomi uppers were very hit or miss