Search results

The parts are a conversion, for FA it's a bolt and barrel, you have to sort out mags (promag 45acp mags). Bolt will run 9mm and 40. For a semi it's just a barrel, though you need to adjust the extractor tension a little to work for both 40 and 9mm Other options are: If you have a 45acp bolt...

I still make them

I've been off the boards dealing with family issues and semi retired. I lurk around once in a while. For the guys that weren't able to get it running in 40 cal/357SIG, Here's some info. The only 9mm mags that will work for 40 cal or 357SIG are the 25rd Star marked Izzy mags with the raised...

Not doing anymore barrels for now. Next project will be announced around Christmas. Stand by

Sorry guys, haven't been on the forum in a while, kinds took the summer off. Right now I'm out of barrel stock.. It will be late fall before I get more in and even then I have another Uzi related project I want to do one last time. More on that later.

The way the old barrels that worked and were safe were done was they were drilled and reamed to bore size out of tool steel. Contoured and hardened when finished. There also needs to be a forcing cone effect between the chamber and the bore size to crush the Bakelite bullet. I think I have a...

Your extractor tension might be high with a full mag and the drag is giving light hits. You should be able to move the extractor hook a little with firm finger pressure. Another way to check is: With bolt and barrel out of the gun, take a spent rd or unprimed and chamber in barrel, then take...

The hardest part was working out a mag catch. You also want to incorporate a stop of some sort to keep the mag from over inserting when the bolt is open.

The angle of the mag and mag height were key. There was enough bullet above the feedlips on the mag for the standard bolt to strip it.

I made one a loooong time ago for the full size and mini. I'll dig up a picture. It was test fired with a full size and unmodified bolt. Ran well.

Other uses for them are the UZI 40 S&W conversions I make semi or FA. If you tweak the feed lips they will work for 45acp.

Most of us start with Green Mountain Rifled blanks and do our own turning and finishing.

There is 1 other option. My rail system https://www.uzitalk.com/reference/pages/rails.htm

If memory serves. D&D used to convert IMI FA bolts to semi bolts. A remanufactured bolt would qualify as a US part. Drilled out for the firing pin and milled off the bolt face lip and cut the bottom for the striker assy. If you look at the rear of the bolt that will probably tell all. My bet...

If you have an extra set of grip panels I can make you a rail system for it.

I don't have any extras anymore. That was a long time ago. The Model A was easier to do with a threaded post. The B can be done but not easily due to design. I will tell you what I used. It was a Marbles fiber optic shotgun front sight with a long thread. I milled down the sides to make it...

Thanks for the info Makes me not want to sell the 1 I have

Thanks

What's the going price these days for an open bolt FA ratcheting Mini top cover?

I still make the rail system as show in the library. Interlocks with handguards and very solid. Much better than the bayo mounts. $70 shipped. Troy