Search results

Cap... Those picture are fine. It seems to me that the parts are the correct parts for each other. IE..both are new style parts. The prblem may be that the trigger spring "leg"(Yes it's a technical term :D ) has developed an accute bend. Call me monday and we'll get a new one sent out to you. If...

Could you take one more picture? I'd like to see the sear in the released position. Just put the selector in SA and trip the sear. You could take a little of the tip of the spring off and it wouldn't hurt the function, as long as you don't remove too much. Or you can bend the spring slightly so...

It sounds,to me as well, as if you aren't getting enough gas to the bolt. You may want to look into a product called a "Pig-tail" gas tube, they replace the short tube and actually wrap around the barrel. It's designed to give more gas to a short barreled M-16 type weapon. I think you can order...

pmf, Are you getting a wear mark on the feed ramp of the barrel at the 5 o' clock position? If so you may have to file a little bit off the corner of the boltface that may be "rubbing" in that area. Mike

Howdy!! :D

Hellooo...did I hear my name?:D Sometimes the stamped ramps work fine. However being stamped lots of times there is irregularities. Thus the "weld-on" feed ramp ;) .

Z06, We aim to please ;) . Enjoy! Mike

In my opinion (for what it's worth) I think the Mini's will probably be worth more later on because fewer were made. Mike

Sorry it's taken me so long to answer, Guys. Just had company leave and I've been pretty busy. Vector serial #'s run roughly between 100082 thru 104047. However Mike Brown didn't assemble the Group Uzis in numerical order. According to Rex, Mike would grab a receiver and make an Uzi, so some of...

Hello...the only thing that's done to the Conn. legal pistol grip is changing some of the pistol grip components so that it only fires FA. To make it select fire again you only have to change pistol grip assemblies. It doesn't void any warranties as long as it's done properly. If I were going to...

Rod, It sounds like your "trigger sear" pin might be working is way out. But it could be caused by something else. If it is the pin we'd just trade you triggers. Just look at your trigger, there's a small "rocking" part with a flaired pin thru it. If it looks like that pin is working it's way...

Dave...glad to help. If I can think of anything else I'll post the info :). Salvo... I think they got a new batch in last week. Give us a call tomorrow. I'll look into it when I get to the shop tomorrow. Muzzleflash...the "semi" feed ramp is a pain in the a$$ for the .22 kit. The only way for...

Gentlemen, With regard to our .22 kits...each kit IS testfired before they are shipped out. The main problem they do need to be "tweaked" for them to work with the customer's weapon. The leading reason for malfunctions is the customer NOT filing the ejector of the weapon as instructed in the...

Hey...that's cool! We've been looking for a place to get some metal loaders! Thanks for the info I'll let Rex know about them. Mike

You are both correct. The model number for both weapons is the same. Reason...they both started out the same size :D. We had to use full size Registered Receivers to make the Minis. Mike

Hi Everyone, With regard to the conversion of registered receivers to accept SMG parts...it is our understanding that as long as the receiver is the registered part that everything else does not matter. How the gun was "originally " converted isn't the issue. The important thing is the what part...

Hi All, Tapping will work fine to fix this problem. I, however, usually polish the upper part of the catch "lip" that engages the mag slot. You can either use some sand paper or scotch-brite. If you have a bench top belt sander even better. Just be carefull not to take off too much. Mike

What do you know I'm a someone :dancing !

Thanks for the info Karl!

Maybe someone here has seen one I haven't. Have any of you run into a Model B SMG? Not a converted gun but factory. We were talking about it at the shop today and we've come to the conclusion that none of us ( even Rex) has seen a SMG stamped Model B that hasn't been converted from a SA gun. If...