Search results

Thanks so much for the info. Since these are German date codes are these mags manufactured by H&K?

I have several MP 5 mags that appear to be H&K clones. There is no manufacturer markings, only 9mmx19, and "IC" or "ID." Can anyone provide information about these mags? I'd like to know who the manufacturer is and if they are reliable.

I'm assuming this is still an open bolt but am also curious if you need to drill the back of the receiver. Looks great. When do you anticipate these being in production?

From what I understand from Lage Manufacturing and Marty at Shockwave some of the early M11's have a more narrow mag well. According to Marty this is not uncommon since he was able to provide a recommendation for someone with experience expanding the welds to accommodate the generation 2 mags...

Paperwork recently cleared on SWD M11/Nine, manufactured in 1983. Nine months ago I when I purchased the gun I also ordered a Lage MKII upper and a two of the Shockwave Zmags from Lage. Well apparently I purchased a few of the 1st generation Zmags, which run flawlessly, I subsequently bought...

I'm looking for a couple of extra guide rods for my full size Vector. Where is the best place to find them?

Who has a 68 round drum mag and can explain the best way to properly load it?

Have you ever wanted to shoot a machine gun? Trust me, it is a blast and here is your opportunity. 8th District candidate for Congress Tim D'Annunzio is having a Machine Gun Social at Jim's Guns, 4632 Yadkin Road, Fayetteville on the 11th of February. $25 buys you a BBQ dinner and one magazine...

I called Ruger a couple of weeks ago and they told me parts were in "limited quantity" but my understanding is that with the exception of the trigger group and receiver mini-14 and AC 556 parts are interchangeable. My AC is my first Class 3, still waiting on my Vector UZI paperwork to get...

What is the process for sending my gun to Ruger? Do I need to schedule it and let them know it is coming? Also what are the legal requirements for shipping? Is there any type of paperwork I need to include? This is my first C3. I suspect you are correct and the Winchester ammo was a rush job...

Shot it today after replacing the recoil spring with a factory spec one. It went through a 30 round mag of American Eagle with one slight hiccup, about the 10th round did not feed from mag and had to manually charge, it then proceeded to dump the last 20 rounds. Damn machine guns are...

Here's a recap; replaced original 25 year old recoil spring with an extra power spring and my gun would not cycle properly-would not extract spent shell casing from second round fired. So I purchased a Ruger spec spring and it still would not function properly on full or burst. This time...

I spoke with my class 3 dealer last night and he thinks the problem is that I purchased an extra power spring rather than simply replacing the spring w/factory specs. Needless to say I have ordered another spring. Prior to swapping out springs my gun was running better, the magazines were...

Jason, Took my AC to the range and it fired fine in semi, but only two rounds on burst (I tried several but the second round was not ejecting, I had to manually charge the bolt to eject spent shell casing), and again the same with full auto-although I did get one series of about 6 or 7 rounds...

The recoil spring I purchased was for a mini-14 (181 or higher) and I have swapped it out with my AC 556's original spring, whihc was nearly 1.5" shorter. I'll report any problems. How do you think the gun will behave with the additional spring tension?

Has anyone replaced the recoil spring in their 556 with a mini-14 equivalent? I ordered one from Brownells and it is a good inch longer than the one I would like to replace. There are several options and I would like to make the correct exchange. Thanks,

Form 4 turn-a-round I just received my first class 3 transfer, it took about four months from the time the check was cashed. Good luck.

I'm in the market for preferably a NIB full size Vector transferable on Form 4.